000 588 35 80 00 Holding Device - WS72.00-P-0040B

Model All (4xWD, CAR, Heavy transporter, Light transporter) 

Use in FG 72/set B 

Purpose: 

Holding device for installing and removing doors.

Technical Note: 

The maximum load capacity of the holding device is 300 kg.

Procurement information: 

This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer 

CON4TOOLS GmbH

Turnstrasse 11

42289 Wuppertal

Germany

http://www.con4tools.de 

• Type/model: Multi-functional holding device for doors

  Article number: EFA06-heavy-duty