Remove/Install Sealing Frame Of Rear-End Door - AR72.20-S-2122E
Model 447
With Code W50 (Rear-end door, double-wing, 180 degrees without window)
Model 447
With Code W54 (Hinged rear doors, opening to side wall)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Open both rear-end doors | ||
| 2 | Remove frame seal (1) | ||
| 3 | Install in the reverse order |