Remove/Install Inner Paneling At Front Door Window Frame - AR72.10-S-6580E
Model 447
Model 448
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Unclip paneling (1) starting at rear (arrow) from retaining clips (2) | Fig 1 | |
| 2 | Guide out rear paneling (1) (arrow) behind door panel (3) upward and remove | ||
| 3 | Check retaining clips (2) for damage and correct seat in window frame | If damaged or seated incorrectly ↓ Replace corresponding retaining clips (2) and position correctly. |
|
| 4 | Install in the reverse order |