Remove/Install Center Guide Rail Paneling For Sliding Door - AR72.16-S-1260-01E

Model 447, 448 

Courtesy of MERCEDES-BENZ USA

Shown with removed sliding door 

1. Unscrew bolt (1).
2. Open sliding door and unscrew bolts (2).
3. Unclip paneling (3) in area of retaining clips (4) and remove.

   To remove paneling (3) leave sliding door slightly open. Otherwise the paint on the sliding door and the paneling (3) can be damaged.

   Check retaining clips (4) for damage.

   for damage

   ↓

   Replace corresponding retaining clips (4).

4. Install in the reverse order.