Blind Spot Assist Wiring Diagram - PE54.71-S-2100-97VKA
Model 447 with code JA7 (Blind Spot Monitoring) with code XM7 (MOPF II) B161/3, B161/4
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 23L |
| B161/3 | Left rear Blind Spot Assist radar sensor | 15A |
| B161/4 | Right rear Blind Spot Assist radar sensor | 20A |
| CAN PER | Peripherals CAN | 7K |
| Code Q22 | Trailer hitch with non-removable ball head | 6C |
| Code Q22 | Trailer hitch with non-removable ball head | 2C |
| Code Q50 | Trailer hitch with removable ball head | 6C |
| Code Q50 | Trailer hitch with removable ball head | 2C |
| N10/1 | Signal acquisition and actuation module (SAM) control unit | 3L |
| W29/10 | Right D-pillar ground point | 5J |
| X30/27 | Peripherals CAN (CAN PER) potential distributor electrical connector | 7L |
| X326x1 | Rear bumper Blind Spot Monitoring electrical connector 1 | 10F |
| X35/111x1 | Main wiring harness/rear bumper Blind Spot Monitoring electrical connector | 7F |
| Z268 | Blind Spot Assist ground connection end sleeve | 19G |
| Z268/1 | Blind Spot Assist tml. 15 connector sleeve | 14H |