LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Maybach GLS600 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System - Body - 167 Chassis (2 Of 3) >> Testing & Repair >> Adjust Wiper Arms - AR82.30-P-6100-01ME

Adjust Wiper Arms - AR82.30-P-6100-01ME

Model 167, 223, 232 With Code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) 

WARNING Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). AS82.30-Z-0001-01A
  Notes on wiper arm adjustment   AH82.30-P-0001-01A
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1003-01J Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 0...+6, 0
Right-hand drive vehicle ∠° -2, 0...-6, 0
WIPER ARM TEST AND ADJUSTMENT VALUES

Number Designation Model 232
BE82.30-P-1003-01L Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° -4, 4...-6, 4
Right-hand drive vehicle ∠° +4, 4...+6, 4
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)
BE82.30-P-1003-01M Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 5...+6, 5
Right-hand drive vehicle ∠° -2, 5...-6, 5
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1004-01J Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 0...+6, 0
Right-hand drive vehicle ∠° -2, 0... -6, 0
WIPER ARM TEST AND ADJUSTMENT VALUES

Number Designation Model 232
BE82.30-P-1004-01L Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° -4, 5...-6, 5
Right-hand drive vehicle ∠° +4, 5...+6, 5
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)
BE82.30-P-1004-01M Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 7...+6, 7
Right-hand drive vehicle ∠° -2, 7...-6, 7
Fig 1: Identifying Adapter (292 589 00 40 00)
G11129283Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Adapter (231 589 00 21 00)
G10112396Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Adjusting Tool Set (211 589 02 21 00)
G11129282Courtesy of MERCEDES-BENZ USA

IMPORTANT The setting of the angle of incidence on the wiper arm to be adjusted is always carried out in the park position and only when the check values deviate from the tolerance range in the reverse or park position. While doing so, the wiper arm to be adjusted is twisted at least by the value of the tolerance deviation in reversing position.

IMPORTANTSPECIAL TOOL The adjustment tool set contains the angle gauge and adjustment lever.

  1. Remove plastic holder (D) from adjustment lever (C) from SPECIAL TOOL adjustment tool set.
    G11970161Courtesy of MERCEDES-BENZ USA
  2. Remove angle gauge (A) from the SPECIAL TOOL adjustment tool set.
  3. Insert SPECIAL TOOL adapter (B) into guide of angle gauge (A) and attach with screw.
  4. Slide SPECIAL TOOL adapter (B) with angle gauge (A) onto wiper blade mount of wiper arm (1) to be adjusted and attach with screw.
  5. Lower wiper arm (1) to be adjusted carefully onto windshield.

    IMPORTANT All three contact points at the foot of the angle gauge (A) must make contact with the windshield.

    Shown on driver-side wiper arm (1) 

    G11970162Courtesy of MERCEDES-BENZ USA
  6. Attach adjustment lever (C) to SPECIAL TOOL adapter (B).
  7. Carefully open engine hood and place in the vertical position.

    Shown on driver-side wiper arm (1) 

    G11970163Courtesy of MERCEDES-BENZ USA
  8. Attach SPECIAL TOOL adapter (E) onto wiper arm (1) to be adjusted as far away from the angle gauge (A) SPECIAL TOOL and the adapter (B) as possible.
  9. Attach second adjustment lever (C) onto SPECIAL TOOL adapter (E).

    IMPORTANT The wiper arm (1) to be adjusted is twisted via adjustment lever (C), which was mounted onto SPECIAL TOOL adapter (B). Adjustment lever (C) serves as a counter holder and was mounted onto SPECIAL TOOL adapter (E).

  10. Push adjustment lever (C) fitted to SPECIAL TOOL adapter (B) in the direction required until the wiper arm (1) to be adjusted is twisted by at least the value of the tolerance deviation in the reversing position.
    G11970164Courtesy of MERCEDES-BENZ USA
  11. Remove adjustment lever (C) and SPECIAL TOOL adapter (E) from adjusted wiper arm (1).
  12. Close hood.

    Shown on driver-side wiper arm (1) 

  13. Read off angle of incidence for adjusted wiper arm (1) on scale of angle gauge (A), note it down and compare against the test and adjustment values, and adjust again if necessary.

    Model 232 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    Model 232 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    Model 167 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    Model 167 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)

    G11970152Courtesy of MERCEDES-BENZ USA
  14. Remove angle gauge (A) with SPECIAL TOOL adapter (B) from adjusted wiper arm (1).

Shown on driver-side wiper arm (1) 

scientia non olet · About LEMON Manuals