Remove/Install Driver's Side Fuse And Relay Module - AR54.15-P-0003ME

Model 167 

MODIFICATION NOTES

13.12.2018

Operation step adapted.

Operation step 4.

Fig 1: Driver's Side Fuse And Relay Module Components Location - Model 167

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Clamp off ground line of on-board electrical system battery (G1).		AR54.10-P-0003ME
2	Unclip cover (1) of instrument panel on the driver's side.
3	Unclip driver fuse and relay module (F152/1) at top (arrows) and remove until the electrical connectors are accessible.
4	Release and disconnect electrical connectors from driver fuse and relay module (F152/1).	The number of electrical connectors varies according to vehicle equipment.
5	Unclip all fuse holders and place to one side.
6	Remove driver fuse and relay module (F152/1).
7	Install in the reverse order