Remove/Install 115V/230V Socket - AR54.10-P-1002ME

Model 167.1/3 

With Code U67 (230 V socket in rear passenger compartment) 

Model 167.1/3 

With Code U80 (115 V socket) 

Model 167.9 

With Code 224 (Individual rear seats) 

With Code U67 (230 V socket in rear passenger compartment) 

except code M036 (Maybach version) 

Model 167.9 

With Code 224 (Individual rear seats) 

With Code U80 (115 V socket) 

except code M036 (Maybach version) 

Model 167.9 

With Code M036 (Maybach version) 

With Code U67 (230 V socket in rear passenger compartment) 

except code 224 (Individual rear seats) 

Model 167.9 

With Code M036 (Maybach version) 

With Code U80 (115 V socket) 

except code 224 (Individual rear seats) 

Shown With Code U67 (230 volt socket in interior) 

Courtesy of MERCEDES-BENZ USA

	Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Clamp off ground line of on-board electrical system battery (G1).		AR54.10-P-0003ME
2	Unclip stowage compartment (1) from catch hooks (arrows).	Long wedge	Fig 1
3	Release catch hooks (2) at stowage compartment (1), pull out 230 V socket (X58/44) or 115 V socket (X58/34) until electrical connector (3) is accessible.
4	Release electrical connector (3), disconnect and remove 230 V socket (X58/44) or 115 V socket (X58/34).
5	Install in the reverse order.