Remove/Install Rear Stabilizer Bar Linkage - AR32.35-P-3329FRX

Model 290 

Shown on left side of vehicle 

Fig 1: Rear Stabilizer Bar Linkage Components Location - Model 290 (Shown On Left Side Of Vehicle)

Courtesy of MERCEDES-BENZ USA

	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
Notice	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
Notice	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove
1	Remove rear shock absorber.		AR32.25-P-0110FRX
2	Remove torsion bar linkage (1) from stabilizer bar (2).	Set of Torx wrench	Fig 3
		Socket wrench	Fig 2
3	Detach torsion bar linkage (1) from wheel carrier (3) and remove.
	Check
4	Check torsion bar linkage (1) for damage and wear.	In the event of a problem, ↓ replace torsion bar linkage (1).
	Install
5	Attach torsion bar linkage (1) to wheel carrier (3).	Screw, torsion bar linkage to wheel carrier	*BA32.35-P-1002-03C
6	Attach torsion bar linkage (1) to stabilizer bar (2).
Notice	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
		Replace bolts and lock in place using Loctite 243.
		Screw, torsion bar linkage to stabilizer bar	*BA32.35-P-1001-03C
		Thread locking agent, Loctite 243 (10 ml)	*BR00.45-Z-1133-02A
		Set of Torx wrench	Fig 3
		Socket wrench	Fig 2
7	Install rear shock absorber.		AR32.25-P-0110FRX

REAR AXLE STABILIZER BAR

Number	Designation			Model 290
BA32.35-P-1001-03C	Screw, torsion bar linkage to stabilizer bar	Stage 1	Nm	30
		Stage 2	∠°	90

REAR AXLE STABILIZER BAR

Number	Designation		Model 290
BA32.35-P-1002-03C	Screw, torsion bar linkage to wheel carrier	Nm	50

Fig 2: Identifying Socket Wrench (205 589 00 09 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Set Of Torx Wrench (211 589 02 09 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1133-02A	Thread locking agent, Loctite 243 (10 ml)	A 613 989 09 71 09