Remove/Install Anti-Roll Bar On Rear Axle - AR32.35-P-2210FRX

Model 290 

Fig 1: Anti-Roll Bar On Rear Axle Components Location - Model 290

Courtesy of MERCEDES-BENZ USA

Notice	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
Notice	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove
1	Remove rear axle.		AR35.10-P-0010FRX
2	Remove both torsion bar linkages (2) from stabilizer bar (1).	Set of Torx wrench	Fig 3
		Socket wrench	Fig 2
3	Remove level sensors with holders from rear axle carrier (3) and place to one side.		AR82.10-P-0005FR
4	Take stabilizer bar (1) off of rear axle carrier (3) and remove.
	Check
5	Check elastomer bearings (4) for wear and damage.	In the event of a problem, ↓ Replace stabilizer bar (1).
	Install
6	Attach stabilizer bar (1) to rear axle carrier (3).	Nut, stabilizer bar to rear axle carrier	*BA32.35-P-1003-03C
7	Attach level sensors with holders to rear axle carrier (3).		AR82.10-P-0005FR
8	Attach both torsion bar linkages (2) to stabilizer bar (1).
Notice	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
		Replace bolts and lock in place using Loctite 243.
		Screw, torsion bar linkage to stabilizer bar	*BA32.35-P-1001-03C
		Thread locking agent, Loctite 243 (10 ml)	*BR00.45-Z-1133-02A
		Set of Torx wrench	Fig 3
		Socket wrench	Fig 2
9	Install rear axle.		AR35.10-P-0010FRX

REAR AXLE STABILIZER BAR

Number	Designation			Model 290
BA32.35-P-1001-03C	Screw, torsion bar linkage to stabilizer bar	Stage 1	Nm	30
		Stage 2	∠°	90

REAR AXLE STABILIZER BAR

Number	Designation		Model 290
BA32.35-P-1003-03C	Nut, stabilizer bar to rear axle carrier	Nm	80

Fig 2: Identifying Socket Wrench (205 589 00 09 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Set Of Torx Wrench (211 589 02 09 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1133-02A	Thread locking agent, Loctite 243 (10 ml)	A 613 989 09 71 09