Charge Air Pipe/Charge Air Cooling - BA09.41-P-1000-01X
Engine 176, 177, 178
MODIFICATION NOTES
| 06.02.2023 | Value changed: Screw/bolt, charge air distributor to cylinder head | Engine 177.7 in model 167, 223 Engine 177.8 in model 192, 223, 232 Engine 177.8 in model 465 |
|
| 06.02.2023 | Value changed: Screw/bolt, charge air distributor to cylinder head | Engine 177.8 in model 290 Engine 177.9 in model 167, 205, 213, 217, 222, 253, 290 Engine 177.9 in model 463 |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 176 | Engine 177.7 in model 167, 223 Engine 177.8 in model 192, 223, 232 Engine 177.8 in model 465 | ||
|---|---|---|---|---|---|
| BA09.41-P-1001-01X | Bolt, charge air cooler bracket to crossmember | Nm | - | - | |
| BA09.41-P-1002-01X | Bolt, clamp for charge air hose to charge-air distributor | Nm | 6 | 6 | |
| BA09.41-P-1003-01X | Bolt, throttle valve actuator to charge air distributor | Nm | - | - | |
| BA09.41-P-1004-01X | Screw/bolt, charge air distributor to cylinder head | Nm | 13 | 10 | |
| BA09.41-P-1005-01X | Bolt, boost pressure sensor upstream/downstream of throttle valve | Nm | 6 | 6 | |
| BA09.41-P-1006-01X | Screw, holder for upper charge air cooler to charge air cooler/chain case cover/cylinder head | Nm | 9 | 8 | |
| BA09.41-P-1007-01X | Bolt, lower charge air cooler bracket to thermostat/crankcase | Nm | 9 | 9 | |
| BA09.41-P-1008-01X | Bolt, throttle valve actuator to charge air cooler | Nm | 9 | 9 | |
| BA09.41-P-1009-01X | Bolt/nut, pressure transducer to bracket/charge air cooler | Nm | 6 | 6 | |
| BA09.41-P-1010-01X | Screw, low-temperature circuit expansion reservoir at bottom to charge air cooler/crankcase/cylinder head cover holder | Nm | 9 | 9 | |
| BA09.41-P-1011-01X | Bolt, low-temperature circuit expansion reservoir at top to low-pressure line | Nm | 9 | 9 | |
| BA09.41-P-1012-01X | Screw/bolt, bypass air switchover valve to charge air cooler | Nm | 8 | 8 | |
| BA09.41-P-1013-01X | Bolt, bypass air switchover valve to bypass valve connecting housing | Nm | - | 8 | |
| BA09.41-P-1014-01X | Bolt, purge lines to bleed line | Nm | 5 | 5 | |
| BA09.41-P-1015-01X | Screw, coolant line holder to low-temperature circuit expansion reservoir at bottom | Nm | 6 | - | |
| BA09.41-P-1016-01X | Bolt, coolant line on charge air cooler | Nm | 6 | - | |
| BA09.41-P-1017-01X | Screw, purge line holder to cylinder head cover | Nm | 8 | - | |
| BA09.41-P-1018-01X | Screw, clamp for charge air hose to exhaust gas turbocharger/air filter housing/charge air cooler | Nm | 4 | 4 | |
| BA09.41-P-1019-01X | Screw, low-temperature circuit expansion reservoir bracket to cylinder head cover/heat shield | M6 | Nm | - | 8 |
| BA09.41-P-1020-01X | Screw, low-temperature circuit expansion reservoir bracket to pressure sensor holder | M6 | Nm | - | 8 |
| BA09.41-P-1021-01X | Screw, purge line to holder | Nm | 20 | - | |
| BA09.41-P-1022-01X | Screw, bleed valve to air filter housing | Nm | - | 3 | |
| BA09.41-P-1023-01X | Screw, clean air line to exhaust gas turbocharger | Nm | - | 8 | |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 177.8 in model 290 Engine 177.9 in model 167, 205, 213, 217, 222, 253, 290 Engine 177.9 in model 463 | Engine 178 | ||
|---|---|---|---|---|---|
| BA09.41-P-1001-01X | Bolt, charge air cooler bracket to crossmember | Nm | - | 8 | |
| BA09.41-P-1002-01X | Bolt, clamp for charge air hose to charge-air distributor | Nm | 6 | 7 | |
| BA09.41-P-1003-01X | Bolt, throttle valve actuator to charge air distributor | Nm | - | 9 | |
| BA09.41-P-1004-01X | Screw/bolt, charge air distributor to cylinder head | Nm | 13 | 13 | |
| BA09.41-P-1005-01X | Bolt, boost pressure sensor upstream/downstream of throttle valve | Nm | 6 | 6 | |
| BA09.41-P-1006-01X | Screw, holder for upper charge air cooler to charge air cooler/chain case cover/cylinder head | Nm | 8 | 18 | |
| BA09.41-P-1007-01X | Bolt, lower charge air cooler bracket to thermostat/crankcase | Nm | 9 | - | |
| BA09.41-P-1008-01X | Bolt, throttle valve actuator to charge air cooler | Nm | 9 | - | |
| BA09.41-P-1009-01X | Bolt/nut, pressure transducer to bracket/charge air cooler | Nm | 6 | - | |
| BA09.41-P-1010-01X | Screw, low-temperature circuit expansion reservoir at bottom to charge air cooler/crankcase/cylinder head cover holder | Nm | 9 | - | |
| BA09.41-P-1011-01X | Bolt, low-temperature circuit expansion reservoir at top to low-pressure line | Nm | 9 | - | |
| BA09.41-P-1012-01X | Screw/bolt, bypass air switchover valve to charge air cooler | Nm | 8 | 8 | |
| BA09.41-P-1013-01X | Bolt, bypass air switchover valve to bypass valve connecting housing | Nm | 8 | 8 | |
| BA09.41-P-1014-01X | Bolt, purge lines to bleed line | Nm | 5 | 8 | |
| BA09.41-P-1015-01X | Screw, coolant line holder to low-temperature circuit expansion reservoir at bottom | Nm | - | - | |
| BA09.41-P-1016-01X | Bolt, coolant line on charge air cooler | Nm | - | - | |
| BA09.41-P-1017-01X | Screw, purge line holder to cylinder head cover | Nm | - | - | |
| BA09.41-P-1018-01X | Screw, clamp for charge air hose to exhaust gas turbocharger/air filter housing/charge air cooler | Nm | 4 | 6 | |
| BA09.41-P-1019-01X | Screw, low-temperature circuit expansion reservoir bracket to cylinder head cover/heat shield | M6 | Nm | 8 | - |
| BA09.41-P-1020-01X | Screw, low-temperature circuit expansion reservoir bracket to pressure sensor holder | M6 | Nm | 8 | - |
| BA09.41-P-1021-01X | Screw, purge line to holder | Nm | - | - | |
| BA09.41-P-1022-01X | Screw, bleed valve to air filter housing | Nm | 3 | - | |
| BA09.41-P-1023-01X | Screw, clean air line to exhaust gas turbocharger | Nm | - | - | |