Remove/Install Boost Pressure Control Pressure Transducer - AR09.41-P-2004MNI
Engine 177 in model 290
MODIFICATION NOTES
| 01.02.2021 | Reference added | Operation step 1. |
Shown on engine 177.9
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. Do not fill engine oil into beverage containers. |
AS18.00-Z-0001-01A | |
| Notice | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove ME-SFI [ME] control unit bracket. | Engine 177.8 in model 290 | AR07.08-P-7016LSE |
| Engine 177.9 in model 290 | AR07.08-P-7016MNI | ||
| 2 | Remove boost pressure control pressure transducer (Y77/1) from ME-SFI [ME] control unit bracket. | *BA09.41-P-1009-01X | |
| 3 | Install in the reverse order. |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 177.8 in model 290 Engine 177.9 in model 167, 205, 213, 217, 222, 253, 290 Engine 177.9 in model 463 |
|
|---|---|---|---|
| BA09.41-P-1009-01X | Bolt/nut, pressure transducer to bracket/charge air cooler | Nm | 6 |