Remove/Install Driver's Side Fuse And Relay Module - AR54.15-P-0003FR
Model 257, 290
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Disconnect ground line from battery. | AR54.10-P-0003FR | |
| 2 | Remove instrument panel cover on driver's side. | Fig 1 | |
| 3 | Release fuse and relay module on driver's side (K40/6) at catches (1) and remove. | ||
| 4 | Disconnect all electrical connectors from fuse and relay module on driver's side (K40/6). | ||
| 5 | Unclip all fuse holders from fuse and relay module on driver's side (K40/6) and place to one side. | ||
| 6 | Remove fuse and relay module on driver's side (K40/6). | ||
| 7 | Change fuses and relays. | When replacing fuse and relay module on driver's side (K40/6). | |
| Assignment of driver-side fuse and relay module | GF54.15-P-1256-49FR | ||
| 8 | Install in the reverse order |