Rear End Floor Tightening Torque Specifications - BA64.20-P-1000-01H
Model 205, 206, 214, 236, 290
REAR-END FLOOR
| Number | Designation | Model 205.013/047/053/054/1 47/213/247/253 | Model 206 with code ME10 (Hybrid vehicle (plug-in, PHEV)) | ||
|---|---|---|---|---|---|
| BA64.20-P-1001-01H | Screw/bolt, crash strut to crossmember | Nm | 23 | 23 | |
| BA64.20-P-1002-01H | Screw/bolt, crash bar to longitudinal member | Nm | 55 | 120 | |
| BA64.20-P-1003-01H | Screw/bolt, crash bar to crash bar bracket | Nm | 55 | 120 | |
| BA64.20-P-1004-01H | Screw/bolt, crash bar bracket to crash strut | Nm | 55 | 23 | |
| BA64.20-P-1005-01H | Nut, crash strut to protective rail | Nm | 23 | 23 | |
| BA64.20-P-1006-01H | Nut, wiring harness holder to crash strut | Nm | - | - | |
| BA64.20-P-1007-01H | Screw, load compartment well to rear-end floor | Nm | - | - | |
| BA64.20-P-1008-01H | Screw, battery frame to spare wheel well | Nm | - | - | |
| BA64.20-P-1009-01H | Screw, holder to load compartment well | M8 | Nm | - | - |
| M6 | Nm | - | - | ||
| BA64.20-P-1010-01H | Screw, wiring harness holder to rear floor | Nm | - | - | |
| BA64.20-P-1011-01H | Screw, control unit holder to rear-end floor | Nm | - | - | |
REAR-END FLOOR
| Number | Designation | Model 214 | Model 236 | |||
|---|---|---|---|---|---|---|
| BA64.20-P-1001-01H | Screw/bolt, crash strut to crossmember | Nm | 23 | 23 | ||
| BA64.20-P-1002-01H | Screw/bolt, crash bar to longitudinal member | Nm | 120 | 120 | ||
| BA64.20-P-1003-01H | Screw/bolt, crash bar to crash bar bracket | Nm | 120 | 120 | ||
| BA64.20-P-1004-01H | Screw/bolt, crash bar bracket to crash strut | Nm | 23 | 23 | ||
| BA64.20-P-1005-01H | Nut, crash strut to protective rail | Nm | 23 | 23 | ||
| BA64.20-P-1006-01H | Nut, wiring harness holder to crash strut | Nm | - | - | ||
| BA64.20-P-1007-01H | Screw, load compartment well to rear-end floor | Nm | - | 10 | ||
| BA64.20-P-1008-01H | Screw, battery frame to spare wheel well | Nm | - | 35 | ||
| BA64.20-P-1009-01H | Screw, holder to load compartment well | M8 | Nm | - | 23 | |
| M6 | Nm | - | 12 | |||
| BA64.20-P-1010-01H | Screw, wiring harness holder to rear floor | Nm | - | - | ||
| BA64.20-P-1011-01H | Screw, control unit holder to rear-end floor | Nm | - | 50 | ||
REAR-END FLOOR
| Number | Designation | Model 290 with code ME10 (Hybrid vehicle (plug-in, PHEV)) | ||
|---|---|---|---|---|
| BA64.20-P-1001-01H | Screw/bolt, crash strut to crossmember | Nm | - | |
| BA64.20-P-1002-01H | Screw/bolt, crash bar to longitudinal member | Nm | - | |
| BA64.20-P-1003-01H | Screw/bolt, crash bar to crash bar bracket | Nm | - | |
| BA64.20-P-1004-01H | Screw/bolt, crash bar bracket to crash strut | Nm | 55 | |
| BA64.20-P-1005-01H | Nut, crash strut to protective rail | Nm | 23 | |
| BA64.20-P-1006-01H | Nut, wiring harness holder to crash strut | Nm | 8 | |
| BA64.20-P-1007-01H | Screw, load compartment well to rear-end floor | Nm | - | |
| BA64.20-P-1008-01H | Screw, battery frame to spare wheel well | Nm | - | |
| BA64.20-P-1009-01H | Screw, holder to load compartment well | M8 | Nm | - |
| M6 | Nm | - | ||
| BA64.20-P-1010-01H | Screw, wiring harness holder to rear floor | Nm | 20 | |
| BA64.20-P-1011-01H | Screw, control unit holder to rear-end floor | Nm | - | |