LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GT 53 AMG >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors -- 290 Chassis >> Basic Knowledge >> Rear Door Control Unit, Component Description - GF72.29-P-6021FR

Rear Door Control Unit, Component Description - GF72.29-P-6021FR

Model 257, 290 

up to model year 2021 

Shown on model 257 

Fig 1: Rear Door Control Unit Components Location - Model 290 Up To Model Year 2021 (Shown On Model 257)
G16550135Courtesy of MERCEDES-BENZ USA

Location 

The rear door control units are located on the corresponding door module behind the door trim.

Task 

The rear door control units have the following tasks:

Reading in of sensors and signals 

The input factors are read in via the following connections:

Direct line 

The left rear door control unit reads in the signals from the following components over direct lines:

The left rear door control unit reads in the signals from the following components over direct lines:

Left rear door LIN (Left rear door control unit (with code 872 (Seat heating in rear))) 

The left rear door control unit reads in the signals of the left rear seat heating switch (S51/3s1) in the left rear seat climate control switch group (S51/3) via the left rear door LIN.

Right rear door LIN (Right rear door control unit (with code 872 (Seat heating in rear))) 

The right rear door control unit reads in the signals of the right rear seat heating switch (S51/4s1) in the right rear seat climate control switch group (S51/4) via the right rear door LIN.

Interior CAN 

The rear door control units read in the following signals, among others, via the interior CAN:

Evaluation of input factors 

The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Actuation of components 

The following components are actuated by the left rear door control unit via direct lines:

IMPORTANT The left rear door control unit supplies the switch illumination (circuit 58d) with power.

The left rear door control unit supplies the following component parts of the ambient lighting (with code 891 (Premium ambient lighting)) with power:

The following components are actuated by the right rear door control unit via direct lines:

IMPORTANT The right rear door control unit supplies the switch illumination (circuit 58d) with power.

The right rear door control unit supplies the following component parts of the ambient lighting (with code 891 (Premium ambient lighting)) with power:

Transmitting signals 

The rear door control units transmits the signals via the following connections:

Rear door LIN 

The rear door control units send the following signals, among others, via the door LIN:

Interior CAN 

The rear door control units send the following signals, among others, via the interior CAN:

  Wiring diagram for left rear door control unit (DCU [TSG])   PE72.29-P-2103-97XBA
  Wiring diagram for right rear door control unit (DCU [TSG])   PE72.29-P-2104-97XBA