Apply Glue For Panoramic Roof Frame - AR77.21-P-0800-03FRX
Model 290 with code 416 (Panoramic sunroof)
| Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes | Wear respiratory protection, protective gloves and safety glasses. Pour adhesive into suitable and appropriately marked containers only. | AS00.00-Z-0016-01A | |
| Topical note | Notes on handling adhesive | AH67.00-P-1000-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
- Cut out triangular opening of the application hose so that the adhesive can be applied with a height of approx. 13 mm and a width of approx. 8 mm.
- Guide application hose in the hatched areas along the body flange; in doing so, press out adhesive evenly.
Immediately remove contamination caused by the adhesive. Immediately press out all excess adhesive from the cartridges after the end of application and dispose of it as per local environmental protection regulations.