Remove/Install Upper Rear-End Center Section Cover - AR68.30-P-4787FRX

Model 290 

MODIFICATION NOTES

29.06.2023

Work procedure adapted.

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove/install
1	Unclip upper rear-end center-section trim (1) at retaining clips (4) and remove.	Ensure guides (3) are correctly seated. Ensure sealing frame (2) of tailgate is correctly seated. Long wedge	Fig 1
2	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA