Remove/Install Global Positioning System (GPS) Antenna - AR82.85-P-0002FR
Model 257, 290 with code 270 (Aerial for GPS)
Shown on model 257.### 1#
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1.1 | Remove left outside mirror (M21/1). | Model 257.### 1#, 290.### 1# with code 270 (Aerial for GPS) | |
| AR88.70-P-9000FR | |||
| 1.2 | Remove right outside mirror. | Model 257.### 2#, 290.### 2# with code 270 (Aerial for GPS) | |
| AR88.70-P-9000FR | |||
| 2.1 | Remove trim at left outside mirror (M21/1). | Model 257.### 1#, 290.### 1# with code 270 (Aerial for GPS) | |
| AR88.70-P-9040FR | |||
| 2.2 | Remove trim at right outside mirror. | Model 257.### 2#, 290.### 2# with code 270 (Aerial for GPS) | |
| AR88.70-P-9040FR | |||
| 3 | Release telephone antenna and place to one side with line attached. | Model 257, 290 with code 270 (Aerial for GPS) with code 274 (Telephone antenna) |
|
| AR82.62-P-0011FR | |||
| 4 | Remove retainer (2) at plug housing (1) of electric line of GPS antenna (A2/23) using a suitable screwdriver (3) (arrow A). | ||
| 5 | Release plug housing (1) (arrow B) and remove (arrow C). | ||
| 6 | Unscrew screw (4). | ||
| 7 | Pull electric line of GPS antenna (A2/23) out of grommet (5) and left outside mirror (M21/1) or right outside mirror. | ||
| 8 | Turn GPS antenna (A2/23) (arrow D) and remove (arrow E). | ||
| 9 | Install in the reverse order. |