Check Wiper Arms And Adjust - AR82.30-P-6000FR
Model 257, 290
Shown on model 257.### 1#
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Notes on wiper arm adjustment | AH82.30-P-0001-01A | ||
| Check | |||
| 1 | Move windshield wiper system into park position. | ||
| 2 | Switch off ignition and store transmitter key outside of transmitter range (at least 2 m). | ||
| 3 | Move windshield wiper system by hand into reversing position. | ||
| 4 | Remove wiper blades. | When working on raised driver-side wiper arm (1) or passenger-side wiper arm (2), ensure that they do not fall onto the windshield. Otherwise windshield will be damaged. |
|
| 5 | Clean wiper blade mounts on driver-side wiper arm (1) and passenger-side wiper arm (2) using a clean cloth. | ||
| 6 | Check angle of incidence of driver-side wiper arm (1) and passenger-side wiper arm (2) relative to windshield. | AR82.30-P-6000-01FR | |
When changing from reversing position to park position, ensure that driver-side wiper arm (1) and passenger-side wiper arm (2) do not make direct contact with windshield. Otherwise windshield will be damaged. |
|||
| Angle of incidence of passenger-side wiper arm in parked position | *BE82.30-P-1004-01M | ||
| Angle of incidence of driver-side wiper arm in parked position | *BE82.30-P-1003-01M | ||
| Angle of incidence of passenger-side wiper arm in reversing position | *BE82.30-P-1002-01M | ||
| Angle of incidence of driver-side wiper arm in reversing position | *BE82.30-P-1001-01M | ||
| Fig 1 | |||
| Fig 3 | |||
| Adjust | |||
| 7 | Adjust angle of incidence of driver-side wiper arm (1) or passenger-side wiper arm (2) in the park position. | If the test values deviate from the tolerance range in the reversing position or in the parked and reversing position. | |
| AR82.30-P-6100-01FR | |||
| Angle of incidence of driver-side wiper arm in parked position | *BE82.30-P-1003-01M | ||
| Angle of incidence of passenger-side wiper arm in parked position | *BE82.30-P-1004-01M | ||
| Fig 1 | |||
| Fig 3 | |||
| 8 | Adjust windshield wiper system. | When the check values of the driver-side wiper arm (1) and passenger-side wiper arm (2) deviate from the tolerance range in the parking position. | |
| AR82.30-P-0001-01FR | |||
| Angle of incidence of passenger-side wiper arm in parked position | *BE82.30-P-1004-01M | ||
| Angle of incidence of driver-side wiper arm in parked position | *BE82.30-P-1003-01M | ||
| *BA82.30-P-1004-01M | |||
| Fig 1 | |||
| Fig 3 | |||
| Fig 2 | |||
| 9 | Mount wiper blades. |
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BE82.30-P-1001-01M | Angle of incidence of driver-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -1, 4...-5, 4 | -1, 4...-5, 4 |
| Right-hand drive vehicle | ∠° | +1, 4...+5, 4 | +1, 4...+5, 4 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BE82.30-P-1002-01M | Angle of incidence of passenger-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -1, 7...-5, 7 | -1, 7...-5, 7 |
| Right-hand drive vehicle | ∠° | +1, 7...+5, 7 | +1, 7...+5, 7 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BE82.30-P-1003-01M | Angle of incidence of driver-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +2, 8...+6, 8 | +2, 8...+6, 8 |
| Right-hand drive vehicle | ∠° | -2, 8...-6, 8 | -2, 8...-6, 8 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BE82.30-P-1004-01M | Angle of incidence of passenger-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +2, 0...+6, 0 | +2, 0...+6, 0 |
| Right-hand drive vehicle | ∠° | -2, 0...-6, 0 | -2, 0...-6, 0 | ||
WINDSHIELD WIPER
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA82.30-P-1004-01M | Screw/bolt, windshield wiper system bracket to partition wall | Nm | 10 | 10 |