Taxi, Basic Function - GF82.25-P-9900A

Model All (CAR) 

with code 965 (Taxi/rental car - electrical pre-installation) 

Overview: 

This document contains information on:

• General 
• Function 

General 

The taxi has extensive taxi equipment ex factory. The specific vehicle wiring harness makes it possible to integrate different equipment in the vehicle.

Function 

The taxi-specific or rental vehicle-specific functions are controlled by the special-purpose vehicle multifunction control unit (SVMCU [MSS]). Depending on the equipment installed, the special-purpose vehicle multifunction control unit (SVMCU) can also be actuated by a two-way radio, a taximeter, an emergency alarm or a card reader and printer. The special-purpose vehicle multifunction control unit (SVMCU) is connected through a CAN connection, for example, to the front signal acquisition and actuation module control unit and the electronic ignition lock control unit.