Rear Display, Basic Function - GF82.60-P-2006A

Model All (4xWD) with code 854 (Rear Seat Entertainment System Plus) 

Model All (CAR) with code 447 (MBUX Rear-Tablet) 

Model All (CAR) with code 447 (Touchscreen in rear) 

Model All (CAR) with code 854 (Rear Seat Entertainment System Plus) 

Model All (CAR) with code 864 (Rear compartment entertainment package) 

Overview 

This document contains information on:

• General 
• Function requirements 
• Function 
  • Structure 

General 

A rear display is installed for the left and right rear seat. The rear displays are the central operating and display units for the Rear Seat Entertainment System. Depending on the equipment installed, control is via the head unit and/or the Rear Seat Entertainment System control unit. The rear displays are connected to the network architecture of the vehicle.

The rear displays are each fastened to the rear of the relevant front seat using a holder.

Function requirements 

• Circuit 30t switched on
• On electric vehicles: Range maximization is not activated for the vehicle interior function area.

After the affected functions are switched on again, range maximization is canceled for the entire function range.

Function 

The rear display (left or right) has the following functions:

• Display of video images, graphical displays and control menus
• Reception and implementation of operation signals via the finger navigation
• Transmission of audio signals to radio frequency headphones via a radio interface
• Provision of connections for audio/video sources and headphones:
  • USB (Universal Serial Bus) connector
  • Headphone connection for cabled headphones
  • HDMI connection (High Definition Multimedia Interface) (depending on equipment)
• Reception of operation signals from the tablet PC or from a smartphone with corresponding Mercedes-Benz app (depending on equipment)
• Communication with head unit and/or with Rear Seat Entertainment System control unit (equipment-dependent)

Structure 

The rear display (left or right) is equipped with the following components:

• Touch-sensitive display with a resolution of 1920 x 1080
• Connections:
  • Headphone connection for cabled headphones or headsets
  • USB connection
  • HDMI connection (equipment-dependent)
• CAN interface (for safeguarding subnetwork operation)
• Radio interface (for transferring audio signals to radio frequency headphones)
• Holder with incline angle adjustment (in vertical plane)

  On vehicles with Rear Seat Entertainment system Plus and reclining rear seat, the incline angle of the rear display on the front passenger side is adjusted electrically, in all other cases mechanically.

• Camera above the display (vehicle-specific)

  The camera is not required for the Rear Seat Entertainment system of telematics unit version NTG 6 and NTG 7. However, it can be used for external applications (e.g. taking part in video conferences). Due to delivery bottlenecks, the camera in the rear display is not installed in all vehicles.

• Microphone
• WLAN interface

The left and right rear display are identical.