Air Suspension - BA32.22-P-1000-03J
Model 290
MODIFICATION NOTES
| 23.05.2019 | Value changed: Pressure line to compressor/valve unit (P) | ||
| 23.05.2019 | Value changed: Pressure line to pressure reservoir/valve unit (SP) |
AIR SUSPENSION
| Number | Designation | Model 290 | |
|---|---|---|---|
| BA32.22-P-1001-03J | Nut, compressor mounting to compressor unit bracket | Nm | 5 |
| BA32.22-P-1002-03J | Nut, compressor unit holder to body | Nm | 20 |
| BA32.22-P-1003-03J | Bolt, valve unit to bracket for compressor unit | Nm | 5 |
| BA32.22-P-1004-03J | Pressure line to compressor/valve unit (P) | Nm | 3, 5 |
| BA32.22-P-1005-03J | Pressure line to pressure reservoir/valve unit (SP) | Nm | 3, 5 |
| BA32.22-P-1006-03J | Pressure line for air suspension on front axle/rear axle to valve unit | Nm | 2 |
| BA32.22-P-1007-03J | Pressure line to air suspension | Nm | 2 |
| BA32.22-P-1008-03J | Nut, pressure reservoir holder to body | Nm | 8 |
| BA32.22-P-1009-03J | Screw, tensioning strap for pressure reservoir holder | Nm | 10 |