Check Engine Oil Level With Instrument Cluster - AP18.00-P-1812MKI

Engine 256 in model 290 

Engine 256, 264, 654, 656 in model 213 

Engine 256, 654, 656 in model 238 

Engine 264, 654 in model 205 

Engine 264, 654, 656 in model 253 

	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	Risk of burn injuries  , suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning  caused by skin contact with solid components of the exhaust.	Wear protective clothing and safety glasses. Use the extraction system. Move people out of the danger zone.	AS49.00-Z-0001-01A
	Preparatory activity
1	Call up workshop level in the instrument cluster.		AP00.20-P-0149U
2	Start engine.	Vehicle must be on a level surface.
3	Select "Vehicle data" panel in workshop menu by making wiping movements on the finger navigation pad.	The oil filling capacity in the oil pan without the oil filter is displayed in the driver's display.
4	Select "Oil level" display by making wiping movements on the finger navigation pad.	The oil level is displayed in the driver's display.
5	Select "Oil filling capacity up to maximum oil level" display by making wiping movements on the finger navigation pad.	The oil filling capacity up to maximum oil level is displayed in the driver's display.
	Check
6	Check engine oil level in driver's display using "Oil filling capacity up to maximum oil level" display.	To receive a valid measurement value, the engine must have been running for at least 120 s since starting and the engine oil temperature must be ≥ 60°C. If the "Oil filling capacity up to maximum oil level" display value is between 0.2 l and -0.1 l, ↓ the engine oil level is OK. If the "Oil filling capacity up to maximum oil level" display value is < -0.1 l, ↓ drain off displayed oil filling capacity and repeat check from operation step 1.	AP18.00-P-1846U
		If the "Oil filling capacity up to maximum oil level" display value is > 0.2 l, ↓ add displayed oil filling capacity and repeat check from operation step 1.	AP18.00-P-1846U
	Finishing activity
7	Switch off engine.