Underbody Paneling Removal And Installation - Ar61.30-P-1001FR

Model 257, 290 

Courtesy of MERCEDES-BENZ USA

Shown on model 290 on left side underfloor paneling (1) 

	Remove/install
1	Raise vehicle.		AR00.60-P-1006A
2	Remove front fender liner (2) from side underfloor paneling (1).
3	Remove longitudinal member panel (3) from side underfloor paneling (1).
4	Remove rear fender liner (4) from side underfloor paneling (1).
5	Remove side underfloor paneling (1).	Slide side underfloor paneling (1) under engine compartment lining and under longitudinal member panel (3).
6	Remove rear underfloor paneling (5).
7	Install in the reverse order.