Install Windshield - AR67.10-P-1700-05FR
Model 257, 290
| Topical note | Notes on handling adhesive | AH67.00-P-1000-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
- Open side window in driver door.
The side window should remain open during the curing time.
Otherwise the windshield (1) can be pressed toward outside by the air when a door is closed.
- Install two cup suction tools on outside of windshield (1).
- Center windshield (1) with a helper above the windshield cutout in the window frame and position so it is congruent with the adhesive strips (arrows).
- Position windshield (1) on adhesive bead and press on until it rests on rubber window spacers and sealing lip.
Otherwise the adhesive force of the adhesive material starts to decrease.
Observe the manufacturer's specifications for the curing time of the adhesive material.