Remove/Install Trim At C-Pillar - AR68.30-P-4490FRX

Model 290 

Shown on right side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove top side load compartment trim.		AR68.30-P-1186FRX
2	Remove edge guard in area of C-pillar (1).	Ensure that edge guard is seated correctly.
3	Unbolt nut (2).
4	Unclip and remove C-pillar trim (1).	Long wedge	Fig 1
5	Install in the reverse order

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA