Remove/Install Paneling On A-Pillar - AR68.30-P-4050FR

Model 257 

Model 290 

Shown on model 257 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Unclip cover (2).	Long wedge	Fig 1
2	Detach edge guard (3) in area of A-pillar paneling (1).	Ensure that edge guard (3) is seated correctly.
3	Unclip A-pillar trim (1) from retaining clip (4) and retaining clamp (5) and pivot slightly inwards at the top.	Long wedge	Fig 1
4	Pull A-pillar paneling (1) towards rear and up out of instrument panel, and remove.
5	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA