Remove/Install Lower Rear-End Center Section Cover - AR68.30-P-4788FRX
Model 290
MODIFICATION NOTES
| 29.06.2023 | Work procedure adapted. |
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove upper rear-end center-section trim. | AR68.30-P-4787FRX | |
| 2 | Remove load compartment floor rear section. | ||
| 3 | Remove intermediate bottom. | Fig 1 | |
| 4 | Remove screw/bolts (3). | ||
| 5 | Remove expansion rivet (2). | Fig 1 | |
| 6 | Unclip lower rear-end center section cover (1) and remove. | ||
| 7 | Transfer warning triangle and tow hook. | When replacing lower rear-end center-section trim (1). | |
| 8 | Install in the reverse order. |