Remove/Install Inside Rearview Mirror - AR68.40-P-0001FR
Model 257, 290
Shown on model 257
| Risk of injury caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. | Wear protective gloves and safety glasses. | AS60.00-Z-0008-01R | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove overhead control panel control unit. | AR82.20-P-1000FR | |
| 2 | Unclip and remove cover (1). | ||
| 3 | Unclip and remove cover (2) in direction of arrow. | ||
| 4 | Turn inside rearview mirror (A67) at mirror base (3) toward right using an open-end wrench (4) and remove from mirror bracket. | ||
| 5 | Adjust reading lamps of inside rearview mirror (A67) to steering variant. | When replacing inside rearview mirror (A67). | AR68.40-P-0001-01FR |
| 6 | Install in the reverse order. |