LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GT 43 AMG >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body Noises, Noise Insulation -- 290 Chassis >> Testing & Repair >> Remove/Install Partition In The Engine Compartment, Left - AR94.20-P-0001-01MSA

Remove/Install Partition In The Engine Compartment, Left - AR94.20-P-0001-01MSA

Model 213, 238, 257, 290 

FROND END WITH FRONT REINFORCEMENT

Number Designation Model 213 Model 238
BA62.30-P-1008-02K Screw, left partition wall to center partition/left front longitudinal member Nm 4 4
FROND END WITH FRONT REINFORCEMENT

Number Designation Model 257 Model 290
BA62.30-P-1008-02K Screw, left partition wall to center partition/left front longitudinal member Nm 4 4
FROND END WITH FRONT REINFORCEMENT

Number Designation Model 213 Model 238
BA62.30-P-1009-02K Nut-and-washer assembly, left partition to center partition/left firewall crossmember Nm 6 6
FROND END WITH FRONT REINFORCEMENT

Number Designation Model 257 Model 290
BA62.30-P-1009-02K Nut-and-washer assembly, left partition to center partition/left firewall crossmember Nm 6 6
FROND END WITH FRONT REINFORCEMENT

Number Designation Model 213 Model 238
BA62.30-P-1010-02K Nut, left partition to left front longitudinal member Nm 4 4
FROND END WITH FRONT REINFORCEMENT

Number Designation Model 257 Model 290
BA62.30-P-1010-02K Nut, left partition to left front longitudinal member Nm 4 4
  1. Detach seal (1) from partition (5).
  2. Remove air duct seal (2).
  3. Unclip retaining clip (3) with electric line at partition (5).
  4. Unclip purge line (4) from retaining clips.
  5. Slacken nuts (6). TORQUE SPECIFICATION
  6. Remove screws (7). TORQUE SPECIFICATION
  7. Release nut (8). TORQUE SPECIFICATION
  8. Remove partition (5) upward.
    G16556564Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals