Remove/Install Liftgate Unlocking Handle - AR72.20-P-2559FRX
Model 290
Shown with CODE 218 (Reversing camera)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear bumper. | AR88.20-P-2200FRX | |
| 2 | Remove license plate bracket. | ||
| 3 | Release and disconnect electrical connector (3) and unclip. | ||
| 4 | Unclip electrical wiring harness (2) along the cap (1). | ||
| 5 | Remove cap (1). | ||
| 6 | Disconnect electrical connectors (7). | ||
| 7 | Release liftgate release handle (5) and remove outward. | ||
| 8.1 | Remove 360° system reversing camera. | Model 290 with code 501 (360° camera) When installing new liftgate release handle (5). |
|
| AR54.65-P-0029FRX | |||
| 8.2 | Remove reversing camera (B84/3). | Model 290 with code 218 (Rear view camera) When installing new liftgate release handle (5). |
|
| AR54.65-P-0030FRX | |||
| 9 | Install in the reverse order. |