Remove/Install Backup Camera - AR54.65-P-0030FRX

Model 290 with code 218 (Rear view camera) 

Fig 1: Backup Camera Components Location - Model 290 With Code 218

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove rear bumper.		AR88.20-P-2200FRX
2	Release, disconnect and unclip electrical connector (3).
3	Unclip electrical wiring harness (2) along cap (1).
4	Remove cap (1).	Ensure that seals (4, 6) are seated correctly.
5	Release bracket (5).	The bracket (1) must latch audibly into place.
6	Remove reversing camera (B84/3).
7	Install in the reverse order.
	Calibrate
8	Calibrate reversing camera (B84/3) with vehicle diagnosis system.
			AD00.00-P-2000-06FR
		Calibration device	Fig 2

Fig 2: Identifying Calibration Device (000 589 01 21 00)

Courtesy of MERCEDES-BENZ USA