Model 117, 118, 164, 166, 167, 169, 172, 176, 177, 190, 197, 199, 204, 207, 212, 216, 218, 221, 222, 230, 231, 245, 246, 247, 251, 292, 415, 420, 447, 448, 463, 470, 471
The recommended wheel/tire combinations apply only when the dimensions are entered in the vehicle documentation at the factory or when a corresponding part certification is present. For tire/wheel combinations not entered in the registration certificate and certificate of conformity, a corresponding part certificate or approval certificate is to be given to the customer.
All tire/wheel combinations listed in the documents may only be installed without the need for any further action if they are listed in Part 1, Section 15 of the Registration Certificate or in Section 32 and 50 of the Certificate of Conformity or if the required Technical Inspection Association reports are available.
The respective size designation for the rim is only binding for the specified vehicle Model series.
Deviations in the contour of the wheel or the brake system can result in contact with adjacent components even if the nominal dimensions for a particular Model series are the same. This, in turn, can impair operational safety.
In the Federal Republic of Germany, modification approval from an officially recognized expert or tester from a technical testing point for motor vehicles or from a testing engineer from an officially recognized supervisory organization is required for wheel/tire combinations which require conversion work on the body and/or chassis.
Otherwise, the operational safety of the vehicle is not ensured.
All tire makes recommended in the documents (except PAX tires for special protection vehicles) bear the identifier "MO" (Mercedes Original).
The recommended tire makes are listed in alphabetical order. No suggestion of priority is intended.