Remove/Install Rear Seat Cushion - AR91.12-P-1021MEM

Model 167.9 

With Code M036 (Maybach Version) 

Courtesy of MERCEDES-BENZ USA

Shown on left rear seat 

	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Remove/install
1	Move front seat to frontmost position.
2	Move seat cushion (1) to frontmost position.
3	Disconnect ground line from battery.		AR54.10-P-0003ME
4	Release seat cushion (1) by pulling release lever (2) and lift far enough until electrical connectors (3) under seat cushion (1) are accessible.	Ensure that sliding blocks (arrows A) are seated correctly in guides (arrows B) of seat frame base (4). The seat cushion (1) must engage audibly.
5	Disconnect electrical connectors (3) under seat cushion (1) and expose electric lines.	The number of electrical connectors (3) varies depending on the vehicle equipment.
6	Remove seat cushion (1) from vehicle.
7	Install in the reverse order.