Check Body Gap Dimensions - Ar60.00-P-0900-01ME
Model 167
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1001-01LA | Engine hood to fender | Dimension "A" | mm | 3 (±0, 5) | 3 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1001-01LA | Engine hood to fender | Dimension "A" | mm | 3 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1002-01LA | Engine hood to bumper | Dimension "B" | mm | 4, 5 (±1, 5) | 4, 5 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1002-01LA | Engine hood to bumper | Dimension "B" | mm | 4, 5 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1003-01LA | Protrusion of radiator trim/soft nose, engine hood | Dimension "B1" | mm | - 2, 5 (±1, 0) | - 2, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1003-01LA | Protrusion of radiator trim/soft nose, engine hood | Dimension "B1" | mm | - 2 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1004-01LA | Bumper to fender | Dimension "C" | mm | 0, 2 (+0, 5) | 0, 2 (+0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1004-01LA | Bumper to fender | Dimension "C" | mm | 0, 2 (+0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | [Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1005-01LA | Fender to headlamp | Dimension "D" | mm | 2 (±1, 0) | 2 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1005-01LA | Fender to headlamp | Dimension "D" | mm | 3, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1006-01LA | Bumper to headlamp at bottom | Dimension "E1" | mm | 1, 5 (±1, 0) | 1, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1006-01LA | Bumper to headlamp at bottom | Dimension "E1" | mm | 2 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1007-01LA | Bumper to headlamp, side | Dimension "E2" | mm | 2, 5 (±1, 0) | 2, 5 (±1, 0) |
| Dimension "E3" | mm | 1, 5 (±1, 0) | 1, 5 (±1, 0) | ||
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1007-01LA | Bumper to headlamp, side | Dimension "E2" | mm | 2, 5 (±1, 0) |
| Dimension "E3" | mm | 2 (±1, 0) | ||
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1008-01LA | Engine hood to headlamp | Dimension "F" | mm | 5 (±1, 5) | 5 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1008-01LA | Engine hood to headlamp | Dimension "F" | mm | 5, 5 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1009-01LA | Front door to fender | Dimension "G" | mm | 3, 5 (±0, 5) | 3, 5 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1009-01LA | Front door to fender | Dimension "G" | mm | 3, 5 (±0, 5) |
| For picture, see | AR60.00-P-0900-CME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1010-01LA | Front door to rear door | Dimension "H" | mm | 4 (±0, 5) | 4 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1010-01LA | Front door to rear door | Dimension "H" | mm | 4 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1011-01LA | Rear door to side wall | Dimension "I" | mm | 3 (±0, 5) | 3 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1011-01LA | Rear door to side wall | Dimension "I" | mm | 3 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1012-01LA | Side wall to bumper at rear | Dimension "J" | mm | 0, 2 (+0, 5) | 0, 2 (+0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1012-01LA | Side wall to bumper at rear | Dimension "J" | mm | 0, 2 (+0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1013-01LA | Sidewall to liftgate | Dimension "K" | mm | 4 (+1/-0, 5) | 4 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1013-01LA | Sidewall to liftgate | Dimension "K" | mm | 4, 5 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1014-01LA | Side wall to outer tail lamp | Dimension "L" | mm | 1 (±0, 5) | 1 (+1/-0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1014-01LA | Side wall to outer tail lamp | Dimension "L" | mm | 2 (+0, 5/-1) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1015-01LA | Outer tail lamp to bumper at rear | Dimension "M" | mm | 2 (±1, 0) | 1, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1015-01LA | Outer tail lamp to bumper at rear | Dimension "M" | mm | 2 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1016-01LA | Liftgate to rear bumper | Dimension "N1" | mm | 4, 5 (±1, 5) | 4, 5 (±1, 5) |
| Dimension "N2" | mm | 5, 5 (±1, 5) | 5, 5 (±1, 5) | ||
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1016-01LA | Liftgate to rear bumper | Dimension "N1" | mm | 4, 5 (±1, 5) |
| Dimension "N2" | mm | 5, 5 (±1, 5) | ||
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1017-01LA | Liftgate to inner tail lamp | Dimension "O1" | mm | 1 (±1, 0) | 1 (+1/-0, 5) |
| Dimension "O2" | mm | 2 (±1, 0) | 1, 5 (±1, 0) | ||
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1017-01LA | Liftgate to inner tail lamp | Dimension "O1" | mm | 1 (±0, 5) |
| Dimension "O2" | mm | 1 (±1, 0) | ||
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1018-01LA | Outside of taillamp to inside of taillamp | Dimension "P" | mm | 4 (±1, 5) | 4 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1018-01LA | Outside of taillamp to inside of taillamp | Dimension "P" | mm | 4, 5 (±1, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1019-01LA | Liftgate to rear window | Dimension "Q" | mm | 2, 5 (±1, 0) | 3 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1019-01LA | Liftgate to rear window | Dimension "Q" | mm | 2, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.9 | ||
|---|---|---|---|---|---|
| BE60.00-P-1020-01LA | Rear window to rear spoiler | Dimension "R1" | mm | 1, 5 (±1, 0) | 1, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.9 | ||
|---|---|---|---|---|---|
| BE60.00-P-1021-01LA | Rear window to side spoiler | Dimension "R2" | mm | 4 (±1, 5) | 4 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.9 | ||
|---|---|---|---|---|---|
| BE60.00-P-1022-01LA | Rear spoiler to roof | Dimension "S" | mm | 4, 5 (±1, 0) | 4, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.9 | ||
|---|---|---|---|---|---|
| BE60.00-P-1023-01LA | Side spoiler to rear side window | Dimension "T" | mm | 4 (-0, 5/+1, 5) | 4 (-0, 5/+1, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.1 | Model 167.3 | ||
|---|---|---|---|---|---|
| BE60.00-P-1024-01LA | Fuel filler flap | Dimension "U" | mm | 2, 5 (±0, 5) | 2, 5 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.9 | ||
|---|---|---|---|---|
| BE60.00-P-1024-01LA | Fuel filler flap | Dimension "U" | mm | 2, 5 (±0, 5) |
| For picture, see | AR60.00-P-0900-01ME | |||
GAP DIMENSIONS
| Number | Designation | Model 167.3 | ||
|---|---|---|---|---|
| BE60.00-P-1025-01LA | Liftgate to roof | Dimension "V" | mm | 4, 5 (±1, 0) |
| For picture, see | AR60.00-P-0900-01ME | |||
Front Gap dimensions, shown on model 167.1
Rear and side Gap dimensions, shown on model 167.1
Rear and side Gap dimensions, shown on model 167.3
- Check Gap dimensions with
feeler gauge as per sketches.
Model 167.9
Model 167.1
Model 167.9
Model 167.1
Model 167.9
Model 167.1
Model 167.9
Model 167.3
Model 167.1
Gap dimensions must be adjusted as per the drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 1 mm over the entire length. If the inside clearance is too large or too small, the movable body parts must be centered accordingly. The reference measurements apply only for repair work on vehicles damaged in accidents.