Remove/Install TV Card Reader - AR82.85-P-7367ME
Model 167 With Code 865 (digital TV)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Open glove compartment housing. | ||
| 3 | Unclip TV card reader (A50/8) with the holder from glove compartment housing and remove until the electrical connector is accessible. | ||
| 4 | Release and disconnect electrical connector from TV card reader (A50/8) and remove TV card reader (A50/8) from glove compartment. | ||
| 5 | Install in the reverse order. |