Remove/Install Rear Axle Brake Caliper Support - AR42.10-P-0221ME
Model 167
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove | |||
| 1 | Remove brake caliper, place to one side with connected brake hose and secure against falling down. | AR42.10-P-0080ME | |
| 2 | Unscrew screws (2) and remove brake caliper support (1). | ||
| Check | |||
| 3 | Check brake caliper support (1) for damage. | If there is a problem, ↓ Replace brake caliper support (1). |
|
| 4 | Check guide pins (3) for damage and ease of movement. | If there is a problem, ↓ Replace brake caliper support (1). |
|
| Clean | |||
| 5 | Clean contact surfaces of brake caliper support (1). | Do not use sharp-edged or pointed objects. Otherwise, the brake caliper support (1) will be damaged. |
|
| Assembly cleaner | *BR00.45-Z-1028-04A | ||
| Install | |||
| 6 | Position brake caliper support (1) and tighten screws (2). | ||
| Notice | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A | |
| *BA42.10-P-1005-12L | |||
| 7 | Install brake caliper. | AR42.10-P-0080ME |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 167 | ||
|---|---|---|---|---|
| BA42.10-P-1005-12L | Bolt, brake caliper support to wheel carrier | Stage 1 | Nm | 60 |
| Stage 2 | ∠° | 45 | ||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |