Prepare Panoramic Sliding Roof Frame Body Flange For Installation - AR77.21-P-0801-03ME

Model 167.1/9 

With Code 413 (Automatic panoramic sliding sunroof) 

1. Cut down adhesive beads (1) on body flange (2) to a remaining height of approx. 1 to 2 mm using a scraper.
2. Remove cutting residues from body flange (2).
3. Repair paintwork damage at body flange (2).

   Use only primer filler approved by Daimler AG: https://xentryportal.i.daimler.com

4. Clean adhesive beads (1) on body flange (2).

   The cleaner is included in the repair kit.

5. Apply activator to body flange (2).

   Apply activator only after drying has dried.

   The strength of the adhesively bonded connection is otherwise impaired and the required adhesion of the adhesive material is not ensured.

   The activator is included in the repair kit.

Courtesy of MERCEDES-BENZ USA