Remove/Install Rear Side Airbag - AR91.60-P-0694MEB

Model 167.1 

With Code 567 (Vario rear seat) 

Fig 1: Rear Side Airbag Components Location - Model 167.1 With Code 567

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove outer cover of left or right rear seat backrest together with seat backrest padding.		AR91.18-P-1872MEB
2	Release and disconnect electrical connector a sidebag unit (3).	Ensure correct engagement of electrical connector (2) at sidebag unit (3).
		Removal lever	Fig 2
3	Remove nuts (2).	Nut, sidebag unit to backrest frame	*BA91.60-P-1009-01R
4	Remove sidebag unit (3) from seat backrest frame (1).
5	Install in the reverse order.
	Check
6	Check Supplemental Restraint System (SRS) using vehicle diagnosis system.
			AD00.00-P-2000-06ME

AIRBAG

Number	Designation		Model 167
BA91.60-P-1009-01R	Nut, sidebag unit to backrest frame	Nm	7

Fig 2: Identifying Removal Lever (203 589 04 33 00)

Courtesy of MERCEDES-BENZ USA