Remove/Install Lower Engine Compartment Lining - Ar61.20-P-1105FR

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Shown with engine 264 except code 481

(Underbody protection)

Fig 1: Lower Engine Compartment Lining (Model 257)

Courtesy of MERCEDES-BENZ USA

	Risk of injury from engine start by remote start function	Prior to starting work, open engine hood, do not reach into rotation range or hazard area of freely rotating parts, wear closed and snug-fitting work clothes	AS00.00-Z-0024-01A .
	Remove/install
1	Open hood.	Vehicles with remote start function
2	Raise vehicle.		AR00.60-P-1006A .
3	Remove center engine compartment lining (4)	Model 257 with code 481 (Sump shield) Screw/bolt, underride guard	*BA61.40-P-1001-01D
4	Remove left front engine compartment lining (1), center front engine compartment lining (2) right front engine compartment lining (3) or rear engine compartment lining (5).	Push left front engine compartment lining (1) and right front engine compartment lining (3) below center front engine compartment lining (2).
5	Install in the reverse order.

UNDERRIDE GUARD

Number	Designation		Model 257 with code 481 (Sump shield)
BA61.40-P-1001-01D	Screw/bolt, underride guard	Nm	17