Remove/Check/Install Rear Axle Brake Pads - AR42.10-P-1710LW
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 213
Model 253
Model 293
Shown on right side of vehicle on model 205, except code B07 (Ceramic brake system)
| Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | AS42.50-Z-0002-01A | |
| Risk of poisoning
from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid |
Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | ||
| Notes on handling, transport and storage of ceramic brake disks | AH42.10-P-9406-13A | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove | |||
| 1 | Detach brake caliper and secure free of tension to vehicle with lines still connected. | AR42.10-P-0080LW | |
The brake hose and the electrical line can otherwise be damaged. |
|||
| 2 | Remove brake pads (1) from brake caliper support (2). | ||
| 3 | Pull right rear brake pad wear sensor out of backing plate of brake pad (1). | When replacing the brake linings (1) or right rear brake wear sensor. | |
| Check | |||
| 4 | Check brake pads (1) for wear and condition. | ||
| Model 293 | AP42.10-P-4252EQ | ||
| Model 205 | AP42.10-P-4252CAA | ||
| Model 253 | AP42.10-P-4252D | ||
| Model 213 | AP42.10-P-4252E | ||
| If a problem arises ↓ Replace brake linings (1) in sets. |
|||
| Clean | |||
| 5 | Clean contact surfaces of brake pads (1) on brake caliper support (2) (arrows) and on brake caliper. | Otherwise, the brake caliper, the dust boot on the brake piston or the brake caliper support (2) may be damaged. Assembly cleaner |
*BR00.45-Z-1028-04A |
| Install | |||
| 6 | Insert rear right brake pad wear sensor on backing plate of brake pad (1). | When replacing the brake linings (1) or right rear brake wear sensor. | |
| 7 | Apply brake paste to brake caliper and to brake caliper support (2). | AR42.10-P-0163-01LW | |
| Lubricant paste | *BR00.45-Z-1130-06A | ||
| Brake paste, Varybond | *BR00.45-Z-1072-06A | ||
| 8 | Insert brake pads (1). | ||
| 9 | Install brake caliper. | AR42.10-P-0080LW |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | Adolf Wurth GmbH & Co. KG |
| BR00.45-Z-1072-06A | Brake paste, Varybond | A 001 989 94 51 |
| BR00.45-Z-1130-06A | Lubricant paste | A 000 989 98 00 09 |