Remove/Install Sliding Sunroof Frame Segment For Panoramic Roof - AR77.21-P-0550MEC
Model 167.3
With Code 413 (Panoramic sliding sunroof/glass roof)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove guide rails for panoramic sliding sunroof. | AR77.21-P-0432MEC | |
| 2 | Remove screw/bolts (2). | ||
| 3 | Remove panoramic sliding sunroof control unit. | AR77.21-P-1280MEC | |
| 4 | Release and disconnect electrical connector (4) and remove from sliding sunroof frame segment (1). | ||
| 5 | Unclip drive cable guides (5). | ||
| 6 | Remove nuts (3). | ||
| 7 | Detach sliding sunroof frame segment (1) from stud bolts and remove. | ||
| 8 | Install in the reverse order. |