(Remove/Install Trim At C-Pillar - AR68.30-P-4490MEX)

Model 167.9 

Shown on left side of vehicle except code M036 (Maybach version) 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove screw at seat belt end fitting of seat belt (1).	Model 167.9 except code M036 (Maybach version)
		Bolt, rear belt end fitting	*BA91.40-P-1005-01U
2	Release load compartment trim (2) in area of C-pillar trim (3).	Model 167.9 except code M036 (Maybach version)
			AR68.30-P-1185MEX
3	Remove cover (4).
4	Unclip C-pillar trim (3) (arrows).	Long wedge	Fig 1
5	Guide seat belt (1) through opening in C-pillar trim (3) and remove C-pillar trim (3).	Model 167.9 except code M036 (Maybach version)
6	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA