Remove/Install Front Fender Liner - AR88.10-P-1301ME

Model 167 

Shown on right side of vehicle 

	Remove/install
1	Raise vehicle.		AR00.60-P-1006A
2	Remove expansion rivets (2).	Dismantling tool	Fig 1
3	Unscrew nuts (3).
4	Unscrew screw/bolts (4).	The number of screws (4) can vary.
5	Pull outer edges of the fender liner front section (1.1) and fender liner rear section (1.2) inward out of the wheel arch lip and remove fender liner front section (1.1) and fender liner rear section (1.2).
6	Install in the reverse order

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)