LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLE53 AMG 4D Utility >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems -- 167 Chassis (2 Of 3) >> Forms >> Customer Declaration, Replacement Of Front Passenger Seat, Deactivation Of Automatic Child Seat Recognition, SBE (Seat Occupied Recognition), Sidebag, Seatbelt Warning Buzzer, Certification - OF91.00-P-1000-03AA

Customer Declaration, Replacement Of Front Passenger Seat, Deactivation Of Automatic Child Seat Recognition, SBE (Seat Occupied Recognition), Sidebag, Seatbelt Warning Buzzer, Certification - OF91.00-P-1000-03AA

Model All 

G15046732Courtesy of MERCEDES-BENZ USA
Process customer request - standard 
Reduction in seat belt warning tone
 
Customer:  Inquiry
Via sales to workshop or directly to workshop
 
Workshop:  - Provide information that decisions are made on an individual case basis
  - Check which version of the customer declaration "Replacement of front passenger seat" is relevant
  - Inform the customer about the risks mentioned in the relevant version of the customer declaration "Replacement of front passenger seat"
 
Customer and workshop:  1st Fill out "Facts" form
       
  2. Fill out the customer declaration "Replacement of front passenger seat"
    - Leave modification date blank (important!)
    - Signature of customer + stamp and signature of workshop
  3. Customer identification
    - Copy of ID
    - Copy of the motor vehicle registration certificate
    - Copy of the disabled ID when seat for disabled person installed
 
Send filled out forms (1+2) + copies (3) per fax to decision-maker (GSP/TP).
 
Fax no. +49-(0) 711-30 52 18 28 09
 
Decision-maker (GSP/TPx):  - Archiving of faxed documents (1-3)
  - The decision-maker informs the workshop of the codes/code as well as the part number of the adhesive label "No automatic child seat recognition"
 
Workshop:  - Attach the "No ACSR"  installed on passenger side of instrument panel (as for model 169)
  - Decoding  using code
  - Careful documentation  in the FDOK [vehicle documentation system] (process + person implementing)
  - Now enter  the date on the customer declaration that was previously left blank
  - Copy  the customer declaration
  - Cut off  and stick  the upper section of the original into the operator's manual (start of the chapter on Safety)
  - Send  the lower section + copy of the complete customer declaration by fax + by letter to the decision-maker (GSP/TPx)
  - Now enter  into the service booklet
  - Customer's obligation  : Entry in the corresponding vehicle documents (Technical Inspection Association acceptance)
  - Recommendation to the customer  : Notification of the insurance company
 
Decision-maker (GSP/TP):  Archiving
    - the lower section of the original as well as
    - a copy of the complete customer declaration with the decision-maker