LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLE53 AMG 4D Utility >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems -- 167 Chassis (1 Of 3) >> Testing & Repair >> Remove/Install Left Or Right Seat Belt In Rear Passenger Compartment - AR91.40-P-0682ME

Remove/Install Left Or Right Seat Belt In Rear Passenger Compartment - AR91.40-P-0682ME

Model 167.1/3 

Model 167.9 

except code M036 (Maybach version) 

G15047427Courtesy of MERCEDES-BENZ USA

Shown on model 167.1 

Shown on model 167.3 

G15047428Courtesy of MERCEDES-BENZ USA
CAUTION Risk of injury.  Injury may result when the tension in the spring in the automatic belt retractor is released. Never disassemble automatic belt retractors. AS91.00-Z-0002-01A 
WARNING Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. AS91.00-Z-0008-01A 
Topical note  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Notes on safety-relevant components   AH00.00-Z-0019-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A 
REMOVINGINSTALLING Remove/install     
1 Disconnect ground line from on-board electrical system battery.   AR54.10-P-0003ME
2.1 Remove side load compartment trim. Model 167.9
except code M036 (Maybach version)
 
      AR68.30-P-1185MEX
2.2 Remove top side load compartment trim. Model 167.3 AR68.30-P-1186MEC
3 Remove C-pillar trim. Model 167.1 AR68.30-P-4490ME
    Model 167.9
except code M036 (Maybach version)
AR68.30-P-4490MEX
4 Remove bolt (2) of seat belt guide. Model 167.1
Model 167.9
except code M036 (Maybach version)
 
    TORQUE SPECIFICATION Screw in rear seat belt guide bracket *BA91.40-P-1011-01U 
5 Detach insulation material in area of seat belt (1). Model 167.1
Model 167.9
except code M036 (Maybach version)
 
    INSTALLATION IMPORTANT Make sure that the insulation material is seated correctly.  
6 Release and disconnect electrical connection (3). SPECIAL TOOL Removal lever Fig 1
7 Unscrew bolt (4) and remove seat belt (1) with seat belt retractor. TORQUE SPECIFICATION Bolt, rear seat belt retractor *BA91.40-P-1006-01U 
8 Install in the reverse order.    
9 Check Supplemental Restraint System (SRS) using vehicle diagnosis system.    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-06ME
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number Designation Model 167
BA91.40-P-1006-01U Bolt, rear seat belt retractor Nm 35
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number Designation Model 167
BA91.40-P-1011-01U Screw in rear seat belt guide bracket Nm 35
Fig 1: Identifying Removal Lever (203 589 04 33 00)
G14549937Courtesy of MERCEDES-BENZ USA