Remove/Install Center Rear Folding Seat Backrest - AR91.12-P-1723ME

Model 167.1 

except code 567 (Vario rear seat) 

Model 167.3 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove rear left folding seat backrest.		AR91.12-P-1724ME
2	Unscrew bolts (2).	Bolt, center pivot bearing to body	*BA91.12-P-1004-03M
3	Remove center pivot bearing (3).	Do not tilt center pivot bearing (3). Otherwise the spacer ring in the center pivot bearing (3) may be damaged. Ensure that the spacer ring is correctly seated on the center pivot bearing (3).
4	Remove center seat backrest (1).	Do not tilt center seat backrest (1). Otherwise the spacer ring in the center pivot bearing (3) may be damaged. Ensure that the spacer ring is correctly seated on the center seat backrest (1).
5	Install in the reverse order

REAR SEATS

Number	Designation		Model 167
BA91.12-P-1004-03M	Bolt, center pivot bearing to body	Nm	50