Remove/Install Rear Engine Support - AR22.10-P-4360OLC

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 213 with engine 274, 642, 654

Model 238 with engine 642, 654

MODIFICATION NOTES

13.09.2017

Bolt, rear engine mount to body

Model 213 with engine 274, 276, 642, 654

BA22.10-P-1005-03N

Shown on MODEL 213 without CODE M005 (4MATIC)

Fig 1: Rear Engine Support Component Location - Model 213 With Engine 274 Without Code M005

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 213 with CODE M005 (4MATIC)

Fig 2: Rear Engine Support Component Location - Model 213 With Engine 274 With Code M005

Courtesy of MERCEDES-BENZ USA

	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Remove center and rear section of lower engine compartment paneling		AR61.20-P-1105LWE
2	Support transmission (4)
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
3.1	Remove Screw/bolt/bolts (1a)	Model 213 with engine 274, 642, 654 except code M005 (4MATIC) Model 238 with engine 654 except code M005 (4MATIC)
		Model 238 with engine 654 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
		Model 213 with engine 274, 642, 654 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
3.2	Unscrew nuts (1c)	Model 213 with engine 274, 642, 654 with code M005 (4MATIC) Model 238 with engine 642, 654 with code M005 (4MATIC)
		Model 238 with engine 642, 654 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
		Model 213 with engine 274, 642, 654 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
4	Remove screws (2a) and remove engine carrier (2)	Never Use an impact wrench/driver or compressed air tools for screwing in or unscrewing the screw/bolts (2a). It will damage the threads.
		Model 213 with engine 274, 642, 654Bolt, rear engine support to body	*BA22.10-P-1005-03N
		Model 238 with engine 642, 654 with code M005 (4MATIC) Model 238 with engine 654 except code M005 (4MATIC) Bolt, rear engine support to body	*BA22.10-P-1005-03O
5	Install in the reverse order

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation			Model 213 with engine 274, 276, 642, 654
BA22.10-P-1004-03N	Rear engine mount to engine support	M6	Nm	18
BA22.10-P-1004-03N	Rear engine mount to engine support	M8	Nm	30

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 238 except code M005 (4MATIC)	Model 238 with code M005 (4MATIC)
BA22.10-P-1004-03O	Rear engine mount to engine support	Nm	30	30

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation				Model 213 with engine 274, 276, 642, 654
BA22.10-P-1005-03N	Bolt, rear engine support to body	M10	Stage 1	Nm	30
BA22.10-P-1005-03N	Bolt, rear engine support to body	M10	Stage 2	Nm	50

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation			Model 238 except code M005 (4MATIC)	Model 238 with code M005 (4MATIC)
BA22.10-P-1005-03O	Bolt, rear engine support to body	Stage 1	Nm	30	30
BA22.10-P-1005-03O	Bolt, rear engine support to body	Stage 2	Nm	50	50