Install Panoramic Sliding Roof Frame - AR77.21-P-0801-05MEC

Model 167.3 

With Code 413 (Panoramic sliding sunroof/glass roof) 

1. Place panoramic sliding sunroof frame (1) onto body.

   Two helpers are required.

   Observe installation position of windshield seal (arrow).

2. Align panoramic sliding sunroof frame (1) with strips of adhesive tape.

   Do not move vehicle for at least 10 h after gluing in the panoramic sliding sunroof frame (1).

   The strength of the adhesively bonded connection is otherwise impaired and the required adhesion of the adhesive material is not ensured.

3. Place loads on panoramic sliding sunroof frame (1) during curing time of adhesive material.

   Use weights with large surface such as sandbags. Otherwise the panoramic sliding roof frame (1) can be damaged.

Courtesy of MERCEDES-BENZ USA