Cut Out Front Fixed Element Of Panoramic Sliding Sunroof - AR77.21-P-0803-01ME

Model 167 

With Code 413 (Panoramic sliding sunroof/glass roof) 

	Risk of injury  from cutting wire tearing or becoming hot and from splinters of glass when cutting out bonded windows	Wear protective gloves and safety glasses.	AS67.00-Z-0004-01A
	Risk of injury  due to snapping or warming up of cutting wire and due to splinters when cutting out glued panoramic roofs	Wear cut-proof gloves and safety glasses.	AS77.21-Z-0002-01A
Topical note	Notes on removal/installation of windows		AH67.10-P-1000-02RT
Topical note	Notes on removal/installation of bonded elements of panoramic roof		AH77.21-P-0001-01A

Fig 1: Identifying Set Of Shields (222 589 01 31 00)

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

1. Saw off an approx. 5 mm to 10 mm wide strip at front left and right transverse side of front fixed element (4).

   Saw carefully.

   Otherwise the windshield may be damaged.

   Observe cutting depth when sawing.

   Otherwise, front panoramic sliding sunroof frame can be damaged.

   Use oscillating saw with round sawing blade.

2. Saw off an approx. 5 mm to 10 mm wide strip at front left and right longitudinal side of front fixed element (4).

   Observe cutting depth when sawing.

   Otherwise, front panoramic sliding sunroof frame can be damaged.

   Use oscillating saw with round sawing blade.

3. Cut through adhesive bead using cutting wire.

   Cover adjacent paint surfaces with set of shields when cutting.

   Otherwise paint can be damage by cutting wire.

   Helper required.

4. Remove front fixed element (4) from panoramic sliding sunroof frame.

   Helper required.